February 13, 2005
Here is our cut frame of our main Doorway. Aply a
2nd Decal to another piece of foamcore and repeat
the steps to create 2 Door Frames. |
|
 |
 |
|
February 13, 2005
You need thickness for the Door way. So 2 pieces
for the sides in similar size and a smaller piece
for the ceiling. |
|
 |
|
|
February 13, 2005
the Hot Glue Gun does the trick to attach the Right
Wall to the Front Door Frame. |
|
 |
|
|
February 13, 2005
Repeat for the other side. make sure, it's VERY important
that the pieces are flush with the frame so that the
Decals work as designed. |
|
 |
|
|
February 13, 2005
The ceiling goes at the TOP of the archway, NOT the
top of the box. |
|
 |
|
|
February 13, 2005
Remember to get the piece as flush as possible to
the Front Frame or you will have lumps in your Decals. |
|
 |
|
|
February 13, 2005
The assembled Door Way minus the Floor. that comes
later... |
|
 |
|
|
February 13, 2005
For now cut 4 pieces of Cardboard NOT foamcore. these
will create rounded corners for the Decals to rest
on. |
|
 |
|
|
February 13, 2005
Use GlueStick on the back of the cardboard. make
sure to cover ALL outer edges. |
|
 |
|
|
February 13, 2005
Now place along one of the Top corners. don't press
into the corner until the ends are aligned with the
frame. |
|
 |
|
|
