March 05, 2005

This room is BIG :) I don't know how many will be created at C3 but remember that this will be a great project for your home when the Decals are available for Download after the convention.

The foamcore is actually 2 sheets side by side. The falcon is the Hasbro toy NOT a micro machine :P

March 05, 2005

Let's start with the Alcove that R2 and 3P0 hide in and rescue the heroes from the Trash Compactor.

Cut out a 36cm X15.5cm piece of Black Foamcore.

March 05, 2005

There is a section that is the alcove so we need to cut that out. On one side measure 12cm, and from the other 6cm. At the top, measure out 2.5cm.

Connect your markings and cut out the center part.

March 05, 2005

For the Side Neon Walls we need 2 pieces of 5.5cm X 13.5cm.

March 05, 2005

Take the Hot Glue Gun and secure the first rectangle to the edge of your main wall.

Make sure your joint is FLUSH with the edges so your decal will not warp or have bumps.

March 05, 2005

Do the same for the other side.

March 05, 2005

Now take your cut out piece and Hot Glue it to the edge of the Left Neon Wall, the one next to the 12cm wall

Make sure it is FLUSH to give you a clean joint.

March 05, 2005

You will notice there is a small .5cm gap on the top end.

DO NOT panic :)

This is where you will fit the ceiling piece later on.

March 05, 2005

When the Hot Glue hardens on your Left Wall,

March 05, 2005

Let the glue harden before glueing the ceiling into place.