March 05, 2005
Now do the same for the other side of the wall. |
|
 |
 |
|
March 05, 2005
And there we go. All that is missing is a Ventilation
Shaft. |
|
 |
|
|
March 05, 2005
You only need 3 openings for this piece.
Again you need to cut 2 foamcore strips measuring
39.5cm X 6cm and 2 measuring 39.5cm X 5cm.
Place your Decals onto the strip that is 39.5cm X
6cm. |
|
 |
|
|
March 05, 2005
Again cut along the embossed edges of the decals
vents. |
|
 |
|
|
March 05, 2005
You now have the front ventilation wall complete. |
|
 |
|
|
March 05, 2005
Use the Hot Glue Gun to attach the 5cm floor piece
to the front wall. |
|
 |
|
|
March 05, 2005
Insert your straws into each other until they are
wide enough to cover the length of the vents.
2 X Grey and 2 X Black. |
|
 |
|
|
March 05, 2005
Take some of your remaining little strips... |
|
 |
|
|
March 05, 2005
... and Hot glue them behind the beams of the front
wall. |
|
 |
|
|
March 05, 2005
Then put some Hot Glue on the strips and lay your
straw on top until the Glue cools off. |
|
 |
|
|
