February 20, 2005
Right Wall:
Cut out another 32cm X 24cm rectangle from your Black
sheet of Foamcore. |
|
 |
 |
|
February 20, 2005
Apply these 4 Decals in this order but Alligning
on the LEFT side this time. Leaving a small .25cm
GAP on the Right of the wall. |
|
 |
|
|
February 20, 2005
Grab your Front Left wall and Hot Glue it in place
aligned with the Left Wall's Exposed Gap. |
|
 |
|
|
February 20, 2005
Now Hot Glue the Right Side Wall to the MacTac making
sure it is alligned flush with the front of the floor
base. |
|
 |
|
|
February 20, 2005
As you did with the Left Front wall, take the Hot
Glue and attach the Right Front wall to the Right
Side wall.
Simple isn't it? :) |
|
 |
|
|
February 20, 2005
Noving onto the Regular walls. Print out and Trim
your Decals for the Left side wall and cut out a 15.5cm
X 14.5cm rectangle.
|
|
 |
|
|
February 20, 2005
Apply ONLY the 6cm Decal and make sure to allign
it to the RIGHT of the Foamcore piece. |
|
 |
|
|
February 20, 2005
Yopu can now use the Hot Glue gun to attach it to
the REAR of the Left Front wall.
It is NORMAL for this wall to NOT reach the height
of the 2 front walls. |
|
 |
|
|
February 20, 2005
Make sure to align your wall precicely with the Left
Front Wall so that the Decal will look nice and smooth
when applied. |
|
 |
|
|
February 20, 2005
Here is a closer view of how flush the 2 pieces should
be. |
|
 |
|
|
