DESIGNING ENDOR : BIG TREE HUTT - SPIRAL BRIDGE

 
 

March 11, 2007

Now take your wall paper and align it center with the sticks pressing ever so gently.

c

March 11, 2007

Once the glue has cooled down, you can use the Hot Glue gun to attach the end corners of the wall to the tree.

March 11, 2007

Put 3 little drops where the arrows are and press with your fingers for a few seconds.

March 11, 2007

Now some glue on the left side.

March 11, 2007

And repeat the same pressure points for a few seconds.

March 11, 2007

Your doorway and wall are complete. You can't get easier then that.

 

March 11, 2007

Now repeat the same process for the lower hutt's wall.

Of course if you are only making the Top Hut, you don't need to do this process.

March 11, 2007

Here you can see how you see Hut One (on top) and Hut Two at the bottom.

 

March 11, 2007

Time to cut up some broom bristles. Chop off a few strands and place them in a bowl for future storage.

March 11, 2007

Grab a little handfull from the container...

 

DESIGNING ENDOR : BIG TREE HUTT - SPIRAL BRIDGE

 
 
©2000-2007 NIUBNIUBSUNIVERSE.COM
special thanks to EVABLUE.COM and GPCP for special interactive web coding