February 16, 2007

Use the Hot Glue gun to dribble glue onto the wire rope between 1 set of popsicle sticks, then Place logs on top of the glue.

February 16, 2007

The glue will get cold quickly so make sure to work only ONE gap at a time.

February 16, 2007

Continue glueing the posts in a clockwise manner.

Of course you won't be able to put posts where the Template Lollipop sticks are located, you will have to do that later.

February 16, 2007

After about 30 minutes, you should have covered your wire twigs all the way around.

February 16, 2007

Now CAREFULLY seperate the wires from the Template.

DANGER !!!

Some Hot Glue may have dripped down and attached the wires OR posts to the Template Foamcore. If you pull too quickly you will tear the template and perhaps dammage your posts.

TAKE YOUR TIME :)

February 16, 2007

Now here is what your Ewok Hut Base will look like once removed from the Template.

It is now upside down, with the wires facing UP.

February 16, 2007

If you wish to REINFORCE your logs, simply add a little Hit Glue all along the edges of the wires.

The glue will drip onto the logs and create a very secure bond.

February 16, 2007

Now carefully flip over the platform to its upright position.

February 16, 2007

Take your Template, flip that over also, and place the Ewok Hut Flooring on top of the Templates underside.

Use the Hot Glue on the wires where there are gaps between the posts...

February 16, 2007

... And place your bamboo fence twigs on top of the glue.

Let the glue cool down a little and your Ewok Floor is complete :) Looks pretty cool doesnn't it?