February 12, 2007
Your tree starts off with 2 cardboard pieces. Since
its a taller tree then the BIG TREE, you want to align
the pieces on the smaller width. |
|
c |
 |
|
February 12, 2007
Take a pen and place some marks at 24" from
the base. Do this on both pieces. |
|
 |
|
|
February 12, 2007
Now align the 2 pieces together. |
|
 |
|
|
February 12, 2007
You will now have a really long 4 foot cardboard. |
|
 |
|
|
February 12, 2007
Place some Masking tape on the seams all the way
accross to maximise the strength of the 2 joining
pieces. |
|
 |
|
|
February 12, 2007
Whatever excess there is you can wrap around to the
other side. |
|
 |
|
|
February 12, 2007
You will now have securely attached one side. FLIP
over the cardboad piece... |
|
 |
|
|
February 12, 2007
... and repeat the same steps as on the other side. |
|
 |
|
|
February 12, 2007
wrap the excess pieces to the other side. Make sure
every inch of the seams are covered with tape. |
|
 |
|
|
February 12, 2007
Now draw a line going 1". against the edge of
the cardboard. |
|
 |
|
|
