March 05, 2007
Start with aligning the center masking tape and use
another piece to attach and keep the tube together
until you are able to place masking tape all along
the seam. |
|
c |
 |
|
March 05, 2007
Now place a piece of tape on one end and align the
sides with the 1 inch line you drew at the begining
making the tube. |
|
 |
|
|
March 05, 2007
Press the pape firmly onto the other side. |
|
 |
|
|
March 05, 2007
Fold inside the remaining tape that sticks out from
the tube. |
|
 |
|
|
March 05, 2007
Align the other side and repeat the same process. |
|
 |
|
|
March 05, 2007
Once both ends are secure, the tube should be solid
enough for you to take tape and place it along the
entire length of the tree tube.
|
|
 |
|
|
March 05, 2007
Because the Small tree isn't as wide as the Medium
or Big tree, we need a little base.
Cut out a 8 inch wide circle in foamcore.
|
|
 |
|
|
March 05, 2007
Place the tube in the center of the circle. Then
place some masking tape to the tube and fold onto
the circle base.
Place a horizontal piece to keep the vertical piece
from peeling off.
|
|
 |
|
|
March 05, 2007
Repeat this process 2 more times so that you are
anchored on 3 edges.
|
|
 |
|
|
March 05, 2007
Now use your Hot Glue Gun to bond all leftover cardboard
that isn't covered in masking tape.
|
|
 |
|
|
