March 13, 2005
Once the Hot Glue cools off your wall unit is complete... |
|
 |
 |
|
March 13, 2005
... well almost :)
Doesn't this look cool? Do you recognise it now?
If you poke a hole out into the Computer Outlet with
a nail, Your R2 Datalink should fit right into it. |
|
 |
|
|
March 19, 2005
If you watch the movie, there are some sort of ventilation
tubing that goes all the way around the Docking Bay.
You need to cut out 2 pieces measuring 66cm X 6cm
and 2 pieces measuring 66cm X 5cm |
|
 |
|
|
March 19, 2005
Print out your ventilation decals. You will need
5 windows for this section. |
|
 |
|
|
March 19, 2005
Apply each decal to the 6cm foamcore strip. NOT the
5cm one. |
|
 |
|
|
March 19, 2005
Continue untill all 5 cover the foamcore rectangle.
Notice that one of the vents rests against the LEFT
side and that 4 rest against the RIGHT side.
|
|
 |
|
|
March 19, 2005
Take your Xacto Blade and slowly - and CAREFULLY
- cut out along the embossed edges of the Decal. |
|
 |
|
|
March 19, 2005
Continue all the way around until you can remove
the center core. |
|
 |
|
|
March 19, 2005
Now repeat the same procedure on all 5 pieces. This
is tedious but TAKE YOUR TIME to avoid injury.
After about 30 minutes your front ventilation wall
is done. |
|
 |
|
|
March 19, 2005
Use the Hot Glue to attach one of the 5cm strips
to the Bottom edge of the Front Ventilation. |
|
 |
|
|
