February 26, 2005

Place the Diorama on a piece of Foamcore and trace along the edges of the floor shape.

BEFORE CUTTING !!!!

Make sure to add an extra 2cm on the edges so that the ceiling can rest on top of the walls.

February 26, 2005

You must start to know by now that the Death Star ceilings are all about Strips :)

Cut out TEN strips 52cm X 3cm wide.

February 26, 2005

Use the Hot Glue gun to secure the first strip in place. Make sure to align it perfectly with the front of the ceiling.

February 26, 2005

Place a spacing strip - DO NOT GLUE - and Hot Glue another strip to the ceiling.

February 26, 2005

Your ceiling should now look like this. Continue with the spacing, glueing until all TEN strips are secured in place.

February 26, 2005

When all strips have cooled off, it's time to trim them.

February 26, 2005

Flip the ceiling upside down...

February 26, 2005

... and SLOWLY trim all excess strips with your Exacto knife.

Watch your fingers !!!

February 26, 2005

When all trims are completed, you will have a perfect Death Star ceiling waiting to be placed on top of the walls.

February 26, 2005

Flip your ceiling with the strips facing downwards and place on top of the walls.

NO NEED to GLUE . Especially if you want to use this Diorama as a playset. :)

February 26, 2005

Oh yeah, One last thing... You will need a Blast Door if you want it to be accurate :P

Go to the blastdoors instructions for the Step by Step pictures and Blueprints for all the measurements then come back here.

February 26, 2005

Once the Blast Door is in place, you are ready for the next room in your Modular Death Star Playset :P

February 26, 2005

A closer view from inside. Do you see a resemblance to the movie set ? :)

February 26, 2005

Here is a still from Episode 4 that I used as reference for this design and construction.

February 26, 2005

Why not finish off with a little comparison picture :) Have you booked your Celebration Tickets yet? :)

Do you want to make your own Death Star Curved Hallway Diorama at home?
These sections are also available to help with this creation.