October 24, 2004

Now get out your Left Corner Door Wall Unit (The one with NO LEFT side wall).

October 24, 2004

Slice off a 45 degree cut of the Back Wall. Make sure to use a NEW blade for this step. It helps give you a cleaner cut.

Remember...Foamcore loves to kill Xacto blades. They dull and befome useless after 12-15 cuts.

October 24, 2004

As you did with the opposite Wall CornerUnit, place it along the corner BEFORE using the Hot Glue to bond it in place.

October 24, 2004

Here you can see how the rear of the Units connect as well as how the floor alligns perfectly with the Corner Unit.

October 24, 2004

The final part of the room is the Top Panel that connects the 2 Wall Units together as well as braces the Blastdoors.

Print out the Door Decals and use scissors to trim /seperate the Panels from the Doors. Now peel or Glue Stick your 2 seperate pieces to Cardboard. Connect the Decals to make it appear as one extra long sticker.

October 24, 2004

After you cut your cardboard with your Xacto Blade, Take your black marker and color the edges to hide the ugly color of the actual cardboard surface.

Go slowly, you don't want the marker to make a line on the Decal itself.

October 24, 2004

Once you have colored all four sides of the carboard we are ready to attach it to Foamcore.

October 24, 2004

Use the Cardboard shape and trace the countour onto Foamcore and the cut out your strip with your Xacto Blade.

October 24, 2004

Get your paintbrush out and paint all the exposed sides of the Foamcore Strip and let dry (about 5 minutes or so with Latex paint)

October 24, 2004

Now take your Hot Glue Gun and attach the Cardboard Strip to the Foamcore Strip.

Make sure to have the Decal on the OPPOSITE side of your Hot Glue :P hee hee.

Your Top Panel Brace is now complete.